210 244 0600

Blog

Extruded vs Expanded Polystyrene: Pros, Cons & Applications

Πίσω στο Blog
Extruded vs Expanded Polystyrene: Pros, Cons & Applications

When you are looking for a thermal insulation material for your roof or for external wall insulation (ETICS), the first question that usually comes up is: extruded or expanded polystyrene?

 

Both materials are polystyrene products, but they are manufactured using different methods and have different properties. Choosing the right material does not depend on which one is “better”, but on which one suits the application you need.

 

In this guide you will see what sets extruded polystyrene apart from expanded polystyrene, where each one is used and how to choose correctly for your project.

 

 

What Is Expanded Polystyrene (EPS)

 

Expanded polystyrene, also known as EPS (Expanded Polystyrene) or polystyrene foam, is made from polystyrene beads that are expanded with steam and fused together in moulds under pressure.

 

The final product consists of 98% trapped air, which is why it is so light. The beads visible on the surface create an open structure that allows a degree of breathability.

 

EPS has been used in the construction industry for decades and is considered the most economical thermal insulation solution. It withstands temperatures from -80°C to +80°C, making it suitable for any climate. It is available in various densities (15-25 kg/m³) depending on the requirements of the project.

 

Key Characteristics of EPS

 

    • Thermal conductivity (λ): 0.031-0.038 W/mK
    • Density: 15-25 kg/m³
    • Water absorption: Moderate (3-5%)
    • Temperature range: -80°C to +80°C
    • Reaction to fire: self-extinguishing, Class E material
    • Colour: White or grey (graphite-enhanced)
    • Cost: Low

 

Advantages of Expanded Polystyrene

 

  • Very low price
  • Very light (adds no significant structural load)
  • Easy to cut and install
  • Good thermal insulation performance
  • Breathable (permeable to water vapour)
  • Fully recyclable
  • Excellent durability over time (100+ years)

 

Disadvantages of Expanded Polystyrene

 

  • Absorbs some moisture
  • Lower mechanical strength
  • Sensitive to mechanical stress
  • Low fire resistance (must be protected)

 

 

What Is Extruded Polystyrene (XPS)

 

Extruded polystyrene, known as XPS (Extruded Polystyrene), is produced by an extrusion process that creates a uniform structure of closed cells.

 

Its closed-cell structure makes it much denser and more resistant to moisture than EPS. This structure allows XPS to retain its thermal insulation properties even in conditions of high humidity or direct contact with water.

 

XPS was developed in response to the need for a thermal insulation material with superior mechanical strength and resistance to moisture. It is available in various colours (usually blue, grey, green or pink) depending on the manufacturer.

 

Key Characteristics of XPS

 

  • Thermal conductivity (λ): 0.028-0.034 W/mK
  • Density: 30-40 kg/m³
  • Water absorption: Almost zero (<1%)
  • Reaction to fire: self-extinguishing, Class E material
  • Colour: Blue, grey, green, pink (depending on the manufacturer)
  • Cost: Higher than EPS

Advantages of Extruded Polystyrene

 

  • Almost zero water absorption
  • High mechanical strength (withstands compressive loads)
  • Better thermal insulation performance per cm
  • Ideal for contact with moisture
  • Long-term stability (50+ years)

 

Disadvantages of Extruded Polystyrene

 

  • Higher price
  • Heavier than EPS
  • Does not breathe (can trap moisture)
  • Low fire resistance

 

 

Comparison Table: Extruded vs Expanded Polystyrene

 

 

Characteristic

Expanded (EPS)

Extruded (XPS)

Thermal conductivity

0.030-0.038 W/mK

0.029-0.034 W/mK

Density

15-25 kg/m³

30-40 kg/m³

Water absorption

Moderate (3-5%)

Almost zero (<1%)

Mechanical strength

Moderate

High

Cost

Low

Higher

Weight

Very light

Heavier

Breathability

Yes

No

Service life

30+ years

50+ years

 

 

Where Each One Is Used

 

Applications of Expanded Polystyrene (EPS)

 

  • External wall insulation (ETICS): EPS, especially graphite-enhanced EPS, is the dominant choice for external walls. Its ability to “breathe” prevents trapped moisture and allows the natural movement of water vapour.

 

  • Roofs and ceilings: For non-walkable roofs and ceilings where load-bearing strength is not required.

 

 

  • Insulation panels: Used as the core of sandwich panels for industrial buildings.

 

 

Applications of Extruded Polystyrene (XPS)

 

  • Roof insulation: XPS is the first choice for flat roofs because of its zero water absorption. It is used in both conventional and inverted roof insulation, where the waterproofing membrane sits below the insulation.

 

  • Basements and foundations: For contact with the ground where moisture is present. XPS provides protection without being degraded by the presence of water in the ground.

 

  • Walkable surfaces: For roofs, garages and cold rooms where load-bearing strength is required.

 

  • Floors with underfloor heating: Its high mechanical strength makes it suitable for use under floors. It withstands the weight of the screed and furniture without deforming.

 

  • Columns and beams in external wall insulation: For insulating concrete elements that may come into contact with water or are located in areas with increased moisture.

 

 

Extruded or Expanded: How to Choose

 

The choice between EPS and XPS is not a question of quality, but of suitability for the specific application. Let us look at when to choose each one:

 

Choose Expanded Polystyrene (EPS) when:

 

  • You are installing external wall insulation on walls
  • You want an economical solution
  • The surface will not come into contact with water
  • No mechanical strength is required
  • Weight is a limiting factor
  • You need a material that breathes

 

Choose Extruded Polystyrene (XPS) when:

 

  • You are insulating a roof
  • The surface will come into contact with moisture/water
  • Load-bearing strength is required (walkable roof, floor)
  • You are insulating a basement or foundations
  • You want the maximum service life (50+ years)
  • The project requires a material that does not absorb moisture

 

 

Reaction to Fire: What You Need to Know

 

Both EPS and XPS belong to Class E in terms of reaction to fire (EN 13501-1). This means that:

 

  • They are affected by fire when they come into contact with it
  • They do not spread the flame once the source of the fire is removed
  • They are not considered fire-resistant materials for spaces with high fire protection requirements

 

For applications with increased fire safety requirements, other materials such as rock wool (Class A1 - non-combustible) are preferred.

 

 

Graphite-Enhanced Expanded Polystyrene

 

Graphite EPS is an improved form of expanded polystyrene with added graphite. The graphite particles reflect infrared radiation, improving thermal insulation performance by 10-20%.

 

  • Thermal conductivity: 0.030-0.033 W/mK
  • Colour: Grey
  • Cost: Slightly higher than white EPS, but lower than XPS

 

Graphite EPS has now become the standard choice for external wall insulation, as it offers better performance than white EPS without a significant increase in cost. To achieve the same thermal insulation value, you need less thickness of graphite EPS than of white EPS.

 

 

Common Mistakes When Choosing

 

Using EPS in a Damp Environment

One of the most common mistakes is using expanded polystyrene in environments where there is moisture or direct contact with water. EPS absorbs some moisture, which reduces its thermal insulation performance. In such cases, XPS is the only correct choice.

 

Using XPS Where It Is Not Needed

The opposite mistake is using extruded polystyrene in applications where it is not required. For example, in external wall insulation XPS offers no significant advantages over graphite EPS, but it costs more. The extra cost is not justified.

 

Ignoring Breathability

XPS does not breathe, which means it can trap moisture if used in the wrong application. On walls where there is moisture coming from the inside, EPS is the safer choice.



Conclusion

 

The choice between extruded and expanded polystyrene is not a question of quality, but of suitability.

 

For external wall insulation, expanded polystyrene (ideally graphite-enhanced) is the best choice. It offers excellent thermal insulation performance, it breathes and it has the lowest cost.

 

For roofs, basements and walkable surfaces, extruded polystyrene offers superior resistance to moisture, higher mechanical strength and a service life of more than 50 years.

 

The right choice comes from taking into account the application, the exposure to moisture, the mechanical requirements and the budget of your project.

 

Request a quote for our services

Contact our team

 

 

Frequently Asked Questions about Extruded and Expanded Polystyrene

 

Which is better, EPS or XPS?

There is no “better” option. XPS is superior in moisture resistance and mechanical strength, but EPS (especially graphite EPS) is more economical and breathes. The choice depends on the application.

 

Can I use EPS on a roof?

EPS can be used on a roof, but it must be protected from direct contact with water. XPS is the safer choice for roofs.

 

How much does XPS cost compared with EPS?

XPS costs about 30-50% more than EPS. However, in applications where it is required (roofs, basements), the difference is justified by its longer service life.

 

Is graphite EPS better than XPS?

Not necessarily. Graphite EPS has better thermal insulation performance than white EPS, but XPS remains superior in moisture resistance and mechanical strength.

 

What thickness do I need?

The thickness required depends on the thermal transmittance coefficient (U-value) you want and the KENAK regulations (the Greek Regulation on the Energy Performance of Buildings). Typically, 7-10 cm of EPS is used for external wall insulation and 6-8 cm of XPS for roofs.

Insulation specifications
What to avoid
I know what insulation I want
Give me an offer

Probably the only ones

who give a real guarantee for the insulations we install.

More

We are 1 of 100 members

of the Panhellenic Association of Insulation Companies.

More
popup-image

We are 1 of 23

certified insulation companies.

More

Certified Insulation

Click on the pictures and see our credentials.

certification
certification